Fingerprint Guide; Normal Mode: Use Fingerprint - Yale YDM4109 User Manual

How to Use
Fingerprint

》 Fingerprint Guide

Normal Mode : It enables you to make separate registration, and open a door through the registered
fingerprint or password.
Security Mode : It enables you to make separate registration and deletion, and open a door only when
the fingerprint number and the fingerprint match.
Repeated Operations
1⃞ 2⃞
➞
Press and lift up the Guide You will see the fingerprint cover
Bar on the fingerprint cover. being raised and start to open.
4⃞ 5⃞
➞
When the fingerprint cover is
Start sweeping your fingerprint
completely open, the lamp will
through the sensor.
be on.
Note
•You may register up to 20 fingerprints. (The same applies to Normal/Security Mode)
※ Note that you may not register 20 fingerprints depending on the state of the previously registered fingerprints.
•Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials and
set off alarm sounds.
•Make sure to register a password just in case you fail to register a fingerprint.
•Make sure to leave the door open when registering a password because you may accidentally lock
a door while trying to register or change a password the first time.
•If an error occurs during registration, the process reverts back the beginning (entering fingerprint).
•If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration will be complete.
•Duplicate fingerprints may be registered. •Same fingerprints can be registered repeatedly.
14
To change modes: Please refer to page 19.
3⃞
➞
6⃞
➞
Complete your fingerprint
registration.

Normal Mode: Use Fingerprint

It enables you to make separate registration, and open a door through the registered fingerprint or password.
》 To Register Fingerprint
Order Play
1⃞ Press (Registration)
Open the battery cover in the back body and
button
press Ⓘ (Registration) button once.
2⃞ Press number 2 button
Press the number 2 button according to the voice guide.
➞ Enter the Master Number
Press the Master Number and then the [#] button on the
➞ Enter button
keypad.
After the operation lamp is on, sweep your fingerprint
3⃞ Register fingerprint
3 times through the fingerprint sensor according to
- 3 times
the voice guide.
Press the Ⓘ (Registration) button in the back body again to
4⃞ Press
(Registration)
complete the fingerprint registration.
button
( Press [#] button to continue the fingerprint registration process.)
》 To Open Door with Fingerprint
Order Play
1⃞ Lift the fingerprint
Lift open the fingerprint cover and wait for the operation
cover open
lamp to light on.
Sweep the registered fingerprint through the fingerprint
2⃞ Enter fingerprint
sensor in the front body.
Check if a door opens!
Make sure to examine if the door opens normally with the
registered password or fingerprint after the registration is
complete.
How to Use
Description
Description
15