Changing The Display Language - Gigaset E560HX User Manual

Getting started

Changing the display language

Change the display language if you do not understand the language currently set.
¤
press
The current language (e. g. English) is selected.
¤
Select the language
To revert to idle status:
Registering the handset (depending on the base)
Registration must be initiated on both the base/router and on the handset.
Both must be carried out within 60 seconds.
On the base/router
On a Gigaset base:
Other base/router:
On the handset
Please register handset flashes on the display.
Registering to a Gigaset base
¤
Press the display key Regist.
system PIN (default setting on Gigaset bases: 0000)
Registering to another base or to a CAT-iq router
¤
. . . Open the menu using the control key
OK Registration
. . . answer the prompt Register at FRITZ!Box? with No . . .
an available system is sought
system PIN OK
A handset can be registered to up to four bases.
De-registering the handset
¤
Menu Settings
Select handset (the actual handset is indicated with a <)
if required OK
Specifying the name of the handset:
8
slowly in succession. The language selection display appears.
OK. The selection is marked with
Press and hold the End call key
¤
Press and hold the Registration/paging key on the base
(approx. 3 seconds).
¤
Information regarding the registration procedure
Documentation regarding your base/your router
OK . . . an available base is sought
OK Register Handset
. . . if required: enter the
OK Registration
. . . confirm de-registration with Yes
Availability and operation of the functions
may differ on your telephone.
.
.
OK
Settings
OK
Yes
OK De-register Handset
OK . . . enter system PIN,
p. 37
. . . if required: enter
Register at
FRITZ!Box?
No
OK