Cooling Fan - Zanussi ZCV664FPB User Manual

Symbol
Oven Lamp
Defrost
100 - 250 Thermaflow®
Activating and deactivating the top /
main oven
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
• The indicator comes on when the
oven heats up.
• The lamp comes on when the
oven operates.
• The symbol shows whether the
knob controls one of the cooking
zones, the oven functions or the
temperature.
1. Turn the knob for the top / main oven
functions to select an oven function.
2. To deactivate the oven turn the knob for the
top / main oven functions to the off position.

Cooling fan

When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the
appliance, the cooling fan can continue to
operate until the appliance cools down.
Using the core temperature sensor
The core temperature sensor measures the core
temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the table for
roasting.
• The core temperature. Refer to the table for
the core temperature sensor.
10
Oven function
To activate the lamp without a cooking function.
This function can be used for defrosting frozen foods, such
as vegetables and fruits. The defrosting time depends on the
amount and size of the frozen food.
To bake on up to two shelf positions at the same time and to
dry food. Set the temperature 20 - 40 °C lower than for
Conventional Cooking.
CAUTION!
Only use the core temperature
sensor supplied with the appliance,
or genuine replacement parts.
1. Put the point of the core temperature
sensor into the centre of the meat.
2. Put the plug of the core temperature sensor
into the socket on the side of the appliance.
The indicator for the core temperature
sensor
3. Press the button
temperature.
You can set the temperature from 30 °C to
99 °C. Refer to values in the table.
4. Set the oven function and the oven
temperature.
5. Press a button to stop the signal.
An acoustic signal sounds for two minutes,
when the meat is at the set core
temperature.
Application
flashes.
or to set the core
www.zanussi.com