Table of Contents
Advertisement
If you want to change the terminal's default baud rate or
use IrDA to communicate with the Host PC, follow the
steps below to adjust it:
1.
Tap Start, Settings, Control Panel, Communica-
tions
2.
Tap the PC Connection tab.
3.
Tap the Change Connection button
4.
Select the baud rate from the list box.
Synchronization
You can synchronize information between the 4210 and your desktop computer
to insure both computers have current information. First you'll need to install
Microsoft ActiveSync on your desktop computer (see page 20).
Synchronization takes place according to the options you chose during Microsoft
ActiveSync setup, as described on page 20. If you accept the default (On Con-
nect) synchronization option in the Microsoft ActiveSync Setup Wizard, you'll be
able to simply connect 4210 to your desktop computer, and synchronization will
take place.
If you have not enabled On Connect, start Microsoft ActiveSync in either of the
following ways:
On your desktop computer, double-click the My Computer
icon and then double-click the Mobile Devices folder.
Plug the RS232 cable between the PC and the 4210.
Execute "Repllog.exe" from the 4210's Windows directory (if
ActiveSync is setup to sync using the IrDA port on both PC
and 4210).
To turn on IrDA:
1. Click on the "Control Panel" icon on your 4210
2. Double-click the "Communication" icon
3. Click the "PC Connection" tab
4. Tap the "Change Connection" button
5. Select IrDA.
26
Falcon 4210
Advertisement
Table of Contents
