Using The Stylus; Pcmcia Pulling-Tags; Protective Screen Film - PSC Falcon 4210 Product Reference Manual

Using the Stylus

CAUTION: Never use anything other than the 4210's stylus on the
screen. Using another object as a stylus could cause permanent
damage.
1. Hold the stylus as you would a pencil.
2. To make a choice from a menu, lightly tap the tip of the stylus on
that choice.
3. To write data into a field on a form, use the stylus to print the letters
or numbers. Use very light pressure.
PCMCIA Pulling Tags
Pulling Tags simplify the removal of PCMCIA cards from the
4210. Before inserting a PCMCIA card, remove one of the three
Pulling Tags from the Pulling Tag sheet and adhere it to both
sides of the PCMCIA card, leaving a short (approx. ½") tab. To
remove the PCMCIA card, simply pull outward on this tab.
If a PCMCIA card is inserted into the 4210 without
previously attaching a Pulling Tag, the card can be
removed by affixing a length of adhesive tape to the
surface of the card and pulling the card out by
pulling outward on the piece of tape.

Protective Screen Film

The 4210 screen ships with a protective plastic film. You may remove this if
desired by peeling from one corner. The screen will be more susceptible to
scratching without the film, but will be more readable.
6 Falcon 4210