Supplying Power To The 4210; Charging The Main And Backup Batteries For The First Time - PSC Falcon 4210 Product Reference Manual

Supplying Power to the 4210

Connect the RS232/Charging Cable to the
4210, and then connect the AC adapter to the
cable's power jack and an electrical outlet.
Or place the 4210 into the
Docking Station (first connect
the power supply to the Docking
Station).

Charging the Main and Backup Batteries for the First Time

It may take up to 14 hours to fully charge the empty Lithium backup battery. The
first time charge should be for at least 14 hours to insure a proper charge.
CAUTION: Operating the 4210 for the first time without the AC adapter, and
without fully charging the Lithium backup battery may result in loss of data
stored in RAM memory.
Product Reference Guide 5