Enabling Acfp Server; Configuring The Acfp Client; Acsei Configuration; Introduction To Acsei - H3C MSR Series User Manual

Enabling ACFP server

Follow these steps to enable the ACFP server:
To do...
Enter system view
Enable the ACFP
server

Configuring the ACFP client

You must configure the ACFP collaboration policy and ACFP
collaboration rules on the ACFP client through MIB. The specific
configuration depends on the service software used on the ACFP client.
NOTE:
For more information about ACFP configuration, see the
•
Series Routers OAA Configuration Guide
Enable the ACFP server only on the router installed with OAP/OAPS
•
modules that require the ACFP function.

ACSEI configuration

Introduction to ACSEI

As a private protocol, ACSEI provides a method for exchanging
information between ACFP clients and ACFP server. It well supports
Application Control Forwarding Protocol (ACFP) collaboration, ensuring
valid information interaction between the ACFP clients and the ACFP
server, so that the ACFP server and clients can cooperate to run a service.
As a supporting protocol of ACFP, ACSEI also has two entities: server
and client.
ACSEI server is integrated into the software system of the router and is
•
supported by the router.
Use the command...
system-view
acfp server enable
7
Remarks
—
Required
Disabled by default
H3C MSR
.