Video Setup Menu - Yamaha DVX-S301 Owner's Manual

Dvd home theater sound system
Hide thumbs Also See for DVX-S301:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

■ Video setup menu

1 In DVD/CD mode, press SET UP.
2 Press
to select [VIDEO SETUP PAGE] icon.
/
3 Press ENTER (OK) to confirm.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
BLACK LEVEL
CLOSED CAPTION
TV type
This menu contains the options for selecting the color
system that matches the connected TV. For details, see
"Selecting the TV type" on page 24.
TV display
This menu contains the options for matching the aspect
ratio of the receiver to the connected TV. For details, see
"Setting the TV display" on page 25.
Progressive function
The progressive scan display present 60 complete frames
per seconds, rather than 30 frames per second of interlaced
scanning (ordinary normal TV system). With nearly
double the number of lines, progressive scan offers higher
picture resolution and eliminates bothersome motion
artifacts those jagged edge on moving objects.
Note
Before enabling the progressive scan function, you must
ensure:
Turn on your TV progressive scan function (refer to
1
your TV owner's manual).
You have connected the DVD receiver to your TV
2
using Y P
(see "Connecting a TV" on page 19).
P
B
R
1 In [VIDEO SETUP PAGE], press
highlight [PROGRESSIVE], then press
OFF
Select this to disable progressive scan function.
ON
Select this to enable progressive scan function.
2 Press
to select a setting and press ENTER
/
(OK) to confirm.
Follow the instructions shown on the TV to
confirm the selection (if any).
– If a blank/distorted TV screen appears, wait for 15
seconds for auto recovery to activate.
Note
If you are changing the setting to
control, follow the procedure below.
1 Open the disc tray.
2 Press
, then press ANGLE.
Picture settings
Note
This receiver comes with three predefined sets of picture
color settings and one personal setting that you can define
yourself.
1 In [VIDEO SETUP PAGE], press
highlight [PICTURE SETTING], then press
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
2 Press
to select a setting and press ENTER
/
(OK) to confirm.
3 If you selected [PERSONAL], proceed to step 4.
The [PERSONAL PICTURE SETUP] menu
appears.
DVD SETUP MENU OPTIONS
to
/
.
by using the remote
OFF
to
/
.
39
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents