Samsung OH46F User Manual page 90

Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Set Network type to Wireless from the Open Network Settings
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
– If the desired wireless router does not appear, select
– If the router cannot be found after retrying, select the
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not have
security, go to step 7.
5
If the router has security, enter the Enter password.
6
When done, use the right arrow button to move the cursor to Done, and then press E. The network
connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The
9
Select the field at the top, press E, and then set
process for each field in the IP Address.
– Setting IP Settings to Enter manually automatically changes
10
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11
When the connection has been verified, the
setup and ready to use." message appears.
page.
Refresh to search again.
Stop button.
(Security key or PIN).
IP Settings screen appears.
IP Settings to Enter manually. Repeat the entry
DNS Setting to Enter manually.
"Your wireless network and Internet connection are
90