Download  Print this page

Power Control; Auto Power On; Max. Power Saving; Standby Control - Samsung OH46F User Manual

Hide thumbs

Advertisement

Power Control

MENU m →
System
Power Control
→ ENTER E
Power Control

Auto Power On

Max. Power Saving

Standby Control

Network Standby
Power Button
Power on only
– The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Off
Max. Power Saving
Off
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
Off
On
On
Standby Control
Off
You can set the screen standby mode to be applied when an input signal is received.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
Off
The message
– If
– If
If this is the case, set
On
Power-saving mode will activate if no input signals are detected.
/
On
/
On
No Signal
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
No Signal
is displayed although a source device is connected, check the cable connection.
No Signal Message
is set to Off, the
No Signal
No Signal Message
to On.
message does not appear.
99

Advertisement

Table of Contents

   Also See for Samsung OH46F

This manual is also suitable for:

Om46f-kOh55fOm55fOm46fOm55f-k

Comments to this Manuals

Symbols: 0
Latest comments: