Smart Diagnosis - LG Signature AM501YWM1 Owner's Manual

FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the antenna
and your body. Users must follow the specific operating
instructions for satisfying RF exposure compliance.
Open Source Software Notice
To obtain the source code contained in this product and
developed under GPL, LGPL, MPL and other open source
licenses, visit http://opensource.lge.com
In addition to the source code, all referred license terms,
warranty disclaimers, and copyright notices are available
for download.
LG Electronics will also provide open source code on CD-
ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com. This
offer is valid for three (3) years from the date on which you
purchased the product.
UG_enUS_esXL.indb 27

Smart Diagnosis™

Should you experience any problems with your appliance,
it has the capability of transmitting data to your smartphone
using the LG Smart ThinQ application or via your telephone
to the LG Customer Information Center.
Smart Diagnosis™ cannot be activated unless the
appliance can be turned on. If the appliance is unable to
turn on, then troubleshooting must be done without using
Smart Diagnosis™.
Diagnosis with Wi-Fi
1
Make sure the appliance is connected to Wi-Fi.
2
Open the Smart ThinQ application and select the
appliance from the list of registered products. Press
the menu at the top right of the smartphone screen.
3
Select Smart Diagnosis™ in the application and then
select the Smart Diagnosis™ button.
• Check the results in the application.
If Wi-Fi Diagnosis Fails
• Smart Diagnosis™ may not succeed if the network
connection is not good. Select Retry in the application to
try again.
• If the Wi-Fi Smart Diagnosis™ fails again, select Audible
Diagnosis in the application and follow the instructions
to perform an audible diagnosis.
Note
For a more detailed diagnosis, contact an LG Customer
Information Center.
27
2017-05-25 1:51:53