Remote Controller - LG Signature AM501YWM1 Owner's Manual

Remote Controller

Mode
Turbo
Start/Stop button
Starts or stops operation.
Mode button
Sets the operating mode.
• Press the button repeatedly to cycle through the
operating modes from Purify → Humid Purify →
Silent.
Turbo button
Quickly purifies the air.
Speed button
Adjusts the fan speed.
Light button
Turns the air quality indicator light on/off.
UG_enUS_esXL.indb 15
Speed
Light
Remote Controller Sensor
Caution
• Do not step on or apply pressure.
• Do not store or use near water or in high humidity.
• Do not store or use near an open flame or heating
devices such as space heaters or ovens. The battery
could explode.
• Remove the battery before storing to avoid damage from
leaking battery fluid.
• Do not disassemble or recharge the battery. Dispose of
the used battery properly to avoid fire or explosion.
Note
• To purchase a replacement remote controller, visit a
nearby LG service center.
• Pressing multiple buttons at the same time may cause
the remote to malfunction.
• To use, hold with the remote controller's transmitter
facing the product's sensor.
• The remote works best within 23 ft. (7m) and 45° to the
left or right of the sensor in front of the product.
• If the remote controller does not work after replacing the
battery, call for service.
• The remote controller may not work under very bright
light from three-wave fluorescent lamps or neon signs.
Remote controller
sensor panel
15
2017-05-25 1:51:46