LG Signature AM501YWM1 Owner's Manual page 26

Note
• Only the 2.4 GHz Wi-Fi frequency is supported.
• The Wi-Fi icon should appear in the product's display
panel during the product registration.
• A wireless AP (access point) or router and internet cable
are not included and must be installed before using the
LG Smart ThinQ application.
• You can contact your ISP (internet service provider)
to purchase and install a wireless AP. If you purchase
and install a wireless AP yourself, follow the installation
instructions included with the wireless AP.
• If the appliance is having trouble connecting to the Wi-Fi
network, it may be too far from the AP or router. Purchase
a Wi-Fi repeater (range extender) to improve the Wi-Fi
signal strength.
• The Wi-Fi connection may not connect or may be
interrupted because of the home network environment.
Contact your service provider for assistance.
• Make sure to set the wireless AP SSID (the name of
the Wi-Fi network) to English letters, numbers, or a
combination of letters and numbers. Do not use special
characters when naming the network or the information
will not be processed correctly by the appliance.
• Be sure to choose your home wireless network and not a
nearby network during setup. Unauthorized use of a Wi-
Fi network is prohibited by law.
• This information is current at the time of publication. The
application is subject to change for product improvement
purposes without notice to users.
26
UG_enUS_esXL.indb 26
Wireless Specifications
Radio wave interference may affect the wireless connection.
Do not use for medical or healthcare purposes.
Wi-Fi
Wireless LAN module Specifications
Model LCW-003
Frequency Range 2412 MHz to 2462 MHz
IEEE 802.11b: 17.56 dBm
Output Power (max.)
IEEE 802.11g: 25.53 dBm
IEEE 802.11n: 25.29 dBm
FCC Notice (For transmitter module
contained in this product)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the
receiver.
– Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation
of the device.
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible
for compliance could void the user's authority to operate the
equipment.
2017-05-25 1:51:53