Newland NLS-FM30 Series User Manual page 44

0x0020
Register
Bit
Bit 7-3 Reserved
1: Enable AIM ID prefix for MSI-Plessey
Bit 2
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
1: Enable AIM ID prefix for Plessey
Bit 1
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
1: Enable AIM ID prefix for Codabar
Bit 0
Note: Bit4 and Bit3 of register 0x0010 must be set to "01" in order for this parameter to function.
0x002B, 0x2A
Register
Bit
Bit 15-13 Reserved
0x09C4: Baud rate 1200
0x04E2: Baud rate 2400
0x0271: Baud rate 4800
0x0139: Baud rate 9600
Bit 12-0 0x00D0: Baud rate 14400
0x009C: Baud rate 19200
0x004E: Baud rate 38400
0x0034: Baud rate 57600
0x001A: Baud rate 115200
Register 0x004A
Bit
Bit 7-4 Reserved
00: Decode unmirrored Data Matrix only
Bit 3-2
10/11: Decode both
1: Decode Data Matrix starting with the character whose ASCII value is 129
Bit 1
0: Do not decode Data Matrix starting with the character whose ASCII value is 129
1: Decode Data Matrix with FNC1
Bit 0
0: Do not decode Data Matrix with FNC1
Feature
0: Disable AIM ID prefix for MSI-Plessey
0: Disable AIM ID prefix for Plessey
0: Disable AIM ID prefix for Codabar
Feature
Feature
01: Decode mirrored Data Matrix only
36