Test Mode - Sony AVD-S10 Service Manual

QQ
3 7 63 1515 0
Note 1: About "R"
As this unit has only a few buttons, some operations require
the use of remote commander (RM-SP10/provided with unit:
1-477-322-11) buttons. These operations are indicated as "R"
in this manual.
Example: ENTER "R" ...Press the ENTER button of the
remote commander.
Note 2: Incorrect operations may be performed if the test mode is not
entered properly.
In this case, press the POWER button to turn the power off,
and retry to enter the test mode.
3-1. Version Display Mode
Procedure:
Press the A button on the main unit or 1 "R" button on the
1.
remote commander to turn the set on.
2. Press three buttons of FUNCTION , . and A
simultaneously for two seconds.
3. The message "VER. 1. ** " is displayed for a moment.
3-2. Jog Test Mode
Procedure:
Press the A button on the main unit or 1 "R" button on the
1.
remote commander to turn the set on.
2. Press three buttons of BAND , x and A simultaneously.
3. The fluorescent indicator displays "JOG 0". The value "JOG
0" increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.
To exit from this mode, press the POWER button to turn the
4.
set off.
TE
L 13942296513
3-3. Key Test Mode
Procedure:
1. Press the A button on the main unit or 1 "R" button on the
remote commander to turn the set on.
Press three buttons of DISPLAY , x and A simultaneously.
2.
3. The message "KEY NUM 0" is displayed and "0" blinks.
4. Each time a button is pressed, "KEY NUM 0" value increases.
However, once a button is pressed, it is no longer taken into
account.
5. When all buttons are pressed, "KEY NUM 11" appears and
the number blinking is stopped.
To exit from this mode, press the POWER button to turn the
6.
set off.
3-4. Display Test Mode
Procedure:
Press the A button on the main unit or 1 "R" button on the
1.
remote commander to turn the set on.
2. Press three buttons of BAND , X and A simultaneously.
3. All segments are turned on.
ALL 1 DISCS AUTO TITLE TRACK
PRO LOGIC
D D DIGITAL FM AM
NTSC PBC ANGLE
When the > button is pressed, the display will light up as
4.
follows.
ALL 1 DISCS AUTO TITLE TRACK
PRO LOGIC
www
D D DIGITAL FM AM
NTSC PBC ANGLE
5. Press the > button, confirm the display.
.
http://www.xiaoyu163.com
CHAPTER INDEX HTUNED M MONO ST S
CHAPTER INDEX HTUNED M MONO ST S
x ao u163
y
i
http://www.xiaoyu163.com
SECTION 3

TEST MODE

2 9
8
Press the > button, all segments are turned off.
6.
Every pressing of the > button turns on each segments in
7.
the same order.
8. To exit from this mode, press the POWER button to turn the
set off.
3-5. OSD Test Mode
Procedure:
1. Press the A button on the main unit or 1 "R" button on the
remote commander to turn the set on.
Set the FUNCTION to DVD.
2.
3. While pressing two buttons of DISPLAY and
x simultaneously, turn the VOLUME knob clockwise.
4. The Test Mode Menu is displayed on the TV screen.
5. To execute each function, select the number on the remote
commander.
6. See the following section for explanation in detail.
To exit from this mode, press the POWER button to turn the
7.
set off.
3-6. Disc Tray Lock
Procedure:
Press the A button on the main unit or 1 "R" button on the
1.
remote commander to turn the set on.
2. Press two buttons of DISPLAY and . simultaneously for
two seconds.
3. The message "LOCKED" is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked.)
4. Press two buttons of DISPLAY and . simultaneously for
two seconds again.
5. The message "UNLOCKED" is displayed and the tray is
Q Q
3 6 7 1 3 1 5
unlocked.
To exit from this mode, press the POWER button to turn the
6.
set off.
3-7. General Description
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
3-8. Starting Test Mode
Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the x button and the DISPLAY button on the main
unit at the same time, turn the VOLUME knob to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the POWER button.
Test Mode Menu
D D dts PCM
0. Syscon Diagnosis
dB REPEAT 1
kHz PROGRAM
1. Drive Auto Adjustment
MHz SHUFFLE
2. Drive Manual Operation
3. Mecha Aging
4. Emergency History
5. Version Information
6. Video Level Adjustment
D D dts PCM
dB REPEAT 1
kHz PROGRAM
_
MHz SHUFFLE
co
Model : SOZ-1269_CE
Revision: 1.xxx
.
AVD-S10
9 4 2 8
0 5 8 2 9 9 4 2 8
m
Exit: POWER Key
Last Off:01
9 9
9 9
11