Connectors - MSI 890FXA-GD65 series User Manual

MS-7640 Mainboard

Connectors

Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
En-14
* The MB layout in this figure is for reference only.
SATA5_6
SATA3_4
SATA1_2
SATA1~6 (6Gb/s)
supported by SB850