Table of Contents
Advertisement
Cleaning Maintenance and Repair
Changing the halogen
bulb
Steps to change the halogen bulb.
1. Switch off the extractor hood and isolate by pulling
out the main plug or switching off the disconnector on
the installation side.
Caution!!!
When switched on, the halogen bulb become very hot.
Even for some time after the bulbs have been switched
off there is still a risk of burns.
2. Remove the bulb ring with a screwdriver or similar
tool.
3. Replace the halogen light bulb (conventional
halogen bulb, 12 Volt, max. 20 Watt, G4 cap).
When switched on, the halogen bulb become very hot.
Even for some time after the bulbs have been switched
off there is still a risk of burns.
Caution!!!
Refer to for plug-in lampholder. Take hold of the bulb
with a clean cloth.
4. Re-insert the bulb ring.
5. Plug the appliance into the mains or switch it on at
the fuse box.
NOTE:
If the light does not function, check that the bulbs have
been inserted correctly.
16
Advertisement
Table of Contents
