Onboard Devices Configuration - Asus PRIME X370-PRO User Manual

SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1~8 Hot-Plug [Enabled]
Allows you to enable/disable the SATA6G_1~8 hot-plug port(s). Configuration options:
[Disabled] [Enabled]
3.6.4

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
PCIEX16_3 4X-2X Switch [Auto]
This item allows you to select the bandwidth of the PCIEX16_3 slot. Configuration options:
[Auto] [2X] [4X]
Asmedia USB 3.1 Controller [Enabled]
[Enabled] Enables the USB 3.1 controller.
[Disabled] Disables the controller.
RGB LED lighting [On]
This item allows you to turn the RGB LED lighting on or off.
Configuration options: [On] [Off]
In sleep, hibernate and soft off states [On]
This item appears when you set RGB LED light to [Enabled].
[On] LEDs will light up in S3 (sleep), S4 (hibernate) and S5 (soft off) states.
[Off] LEDs will not light up in S3 (sleep), S4 (hibernate) and S5 (soft off) states.
Intel LAN Controller [On]
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [On] [Off]
Intel LAN OPROM [Off]
This item appears only when you set the previous item to [On] and allows you to enable or
disable the PXE OptionRom of the Intel LAN controller. Configuration options: [On] [Off]
Charging USB devices in Power State S5 [Disabled]
[Enabled] Charges USB devices even in when the system is in Power State S5.
[Disabled] Disables this function.
USB Type C Power Switch for USB3_C7 [Auto]
[Enabled] For Type C power on.
[Auto] Turn Off Type C power if the device is not supported.
ASUS PRIME X370-PRO
3-19