Bios Update Instructions Using Ez-Flash Method - Viglen Vig760S Manual

5.3.3 BIOS Update Instructions using EZ-Flash Method

For this method you will require a Flash USB device and required BIOS file.
1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to
select ASUS EZ Flash Utility and press <Enter> to enable it.
3. Press <Tab> to switch to the Drive field.
4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest
BIOS, and then press <Enter>.
5. Press <Tab> to switch to the Folder Info field.
6. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to
perform the BIOS update process. Reboot the system when the update process is
done.
Note:
•
This function supports USB flash disks formatted using FAT32/16 on
a single partition only.
• Ensure to load the BIOS default settings to ensure system
compatibility and stability. Select the Load Optimized Defaults item
under the Exit menu.
IMPORTANT!
During the update process DO NOT shut down the PC or interrupt the
process, this could cause damage to the motherboard.
34
V1.0 Vig760S Motherboard Manual