Gemini 4100 Instruction Manual page 59

APPENDIX "D" - GEMINI DUAL COUNTER MODE FUNCTION COMMAND CODE SUMMARY
CODE MODE
65 CNTR A DECIMAL POINT & LEAD ZERO BLANKING
(+) Leading Zero Blanking Enabled
(-) Leading Zero Blanking Disabled*
+/-1 No Decimal Point
+/-2 Decimal Point Right of Digit 2
+/-3 Decimal Point Right of Digit 3
+/-4 Decimal Point Right of Digit 4
+/-5 Decimal Point Right of Digit 5
+/-6 Decimal Point Right of Digit 6
66 "OPERATOR ACCESSIBLE FUNCTIONS" MODES
(+) Reset Button & "RST" Terminal Enabled
(-) Reset Button & "RST" Terminal Disabled*
+/-1 No Functions Enabled
+/-2 Preset Programming Enabled
+/-3 Scale Factor Programming Enabled
+/-4 Preset & Scale Factor Programming Enabled
+/-5 Preset & Counter Load Programming Enabled
+/-6 Preset, Scale Factor & Cnter Load Programming Enabled
1 PRESET 1
2 PRESET 2
3 Display A COUNTER A SCALE FACTOR
3 Display B COUNTER B SCALE FACTOR
E & Display A COUNTER A COUNTER LOAD VALUE
+/-
E & Display B COUNTER B COUNTER LOAD VALUE
+/-
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
DESCRIPTION COMMENTS
"PGM DIS" Terminal connected to "Comm"
Front panel reset can be independently disabled by using
DIP switch.
This mode has no affect on the "RST A" terminal which is
always enabled.
Up to +/-999999
Up to +/-999999
Up to +/-5.9999
Up to +/-5.9999
Up to +/-999999. Counter Load value is NOT saved in
memory when power is removed.
Up to +/-999999. Counter Load value is NOT saved in
memory when power is removed.