Gemini 4100 Instruction Manual page 55

APPENDIX "D" - GEMINI COUNTER/RATE MODE FUNCTION COMMAND CODE SUMMARY
CODE MODE
64 RATE SCALE MULTIPLIER (Cont'd)
5 0.1
6 0.01
65 RATE DECIMAL POINT & LEAD ZERO BLANKING
(+) Leading Zero Blanking Enabled
(-) Leading Zero Blanking Disabled*
+/-1 No Decimal Point
+/-2 Decimal Point Right of Digit 2
+/-3 Decimal Point Right of Digit 3
+/-4 Decimal Point Right of Digit 4
+/-5 Decimal Point Right of Digit 5
+/-6 Decimal Point Right of Digit 6
66 "OPERATOR ACCESSIBLE FUNCTIONS" MODES
(+) Reset Button & "RST" Terminal Enabled
(-) Reset Button & "RST" Terminal Disabled*
+/-1
+/-2
+/-3
+/-4
+/-5
+/-6
1 PRESET 1
2 PRESET 2
3 Display A RATE SCALE FACTOR
3 Display B COUNTER SCALE FACTOR
E & Display B COUNTER LOAD VALUE
+/-
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
DESCRIPTION COMMENTS
"PGM DIS" Terminal connected to "Comm"
Front panel reset can be independently disabled by using
DIP switch.
This mode has no affect on the "RST A" terminal which is
always enabled.
No Functions Enabled
Preset Programming Enabled
Scale Factor Programming Enabled
Preset & Scale Factor Programming Enabled
Preset & Counter Load Programming Enabled
Preset, Scale Factor & Counter Load Programming Enabled
Up to +/-999999
Up to +/-999999
Up to 5.9999
Up to +/-5.9999
Up to +/-999999. Counter load value is NOT saved in
memory when power is removed.