APPENDIX "D" - GEMINI COUNTER/RATE MODE FUNCTION COMMAND CODE SUMMARY
CODE
MODE
51
OUTPUT ASSIGNMENT
(+) Preset Tracking Disabled
(-) Preset Tracking Enabled
+/-1
Output 1 to Rate A, Output 2 to Counter B
+/-2
Outputs 1 & 2 to Counter B
+/-3
Outputs 1 & 2 to Rate A
52
OUTPUT 1 TERMINATION MODES
(+) Normal Phase
(-) Reverse Phase*
+/-1
Terminate at Output 2 Start (Gemini 4200 only)
+/-2
Terminate at Output 2 End (Gemini 4200 only)
+/-3
Terminate at Manual Reset
+/-4
Terminate at Manual Reset End
+/-5
Terminate after Timed Output 1
+/-6
Boundary
53
TIMED OUTPUT 1 VALUE
54
GEMINI 4200 OUTPUT 2 TERMINATION MODES
(+) Normal Phase
(-) Reverse Phase*
+/-1
Terminate at Output 1 Start
+/-2
Terminate at Output 1 End
+/-3
Terminate at Manual Reset
+/-4
Terminate at Manual Reset End
+/-5
Terminate after Timed Output 2
+/-6
Boundary
55
GEMINI 4200 TIMED OUTPUT 2 VALUE
56
COUNTER RESET MODES
(+) Maintained
(-) Momentary*
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
DESCRIPTION
COMMENTS
Preset 1 tracks Preset 2
Automatically selects code [56,1].
Output normally "OFF", turns "ON" at preset.
Output normally "ON", turns "OFF" at preset.
Only available when [51 2]
Only available when [51 2]
Range 0.01 to 599.99 sec.
Output normally "OFF", turns "ON" at preset.
Output normally "ON", turns "OFF" at preset.
Only available when [51 2]
Only available when [51 2]
Automatically selects code [56 1]
Range 0.01 to 599.99 sec.
Unit remains reset as long as reset is activated.
Unit will reset instantly and will start counting again
even if reset is still activated.