Gemini 4100 Instruction Manual page 57

APPENDIX "D" - GEMINI DUAL COUNTER MODE FUNCTION COMMAND CODE SUMMARY
CODE MODE
51 OUTPUT ASSIGNMENT
(+) Preset Tracking Disabled
(-) Preset Tracking Enabled*
+/-1 Output 1 to Counter A, Output 2 to Counter B
+/-2 Outputs 1 & 2 to Counter B
52 OUTPUT 1 TERMINATION MODES
(+) Normal Phase
(-) Reverse Phase*
+/-1 Terminate at Output 2 Start (Gemini 4200 only)
+/-2 Terminate at Output 2 End (Gemini 4200 only)
+/-3 Terminate at Manual Reset
+/-4 Terminate at Manual Reset End
+/-5 Terminate after Timed Output
+/-6 Boundary
53 TIMED OUTPUT 1 VALUE
54 GEMINI 4200 OUTPUT 2 TERMINATION MODES
(+) Normal Phase
(-) Reverse Phase*
+/-1 Terminate at Output 1 Start
+/-2 Terminate at Output 1 End
+/-3 Terminate at Manual Reset
+/-4 Terminate at Manual Reset End
+/-5 Terminate after Timed Output 2
+/-6 Boundary
55 GEMINI 4200 TIMED OUTPUT 2 VALUE
56 COUNTER B RESET MODES
(+) Maintained
(-) Momentary*
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
DESCRIPTION COMMENTS
Preset 1 tracks Preset 2
Automatically selects [61 1]
Output normally "OFF", turns "ON" at preset.
Output normally "ON", turns "OFF" at preset.
Only available when [51 2]
Only available when [51 2]
Automatically selects code [61 1] if [51 1]
Range 0.01 to 599.99 sec.
Output normally "OFF", turns "ON" at preset.
Output normally "ON", turns "OFF" at preset.
Only available when [51 2]
Only available when [51 2]
Automatically selects code [56 1].
Range 0.01 to 599.99 sec.
Unit remains reset as long as reset is activated.
Unit will reset and start counting again, even if reset is
still activated.