MATTRESS FIRM 100 I/C-UBL Owner's Manual page 9

steP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: An electrical surge protection device is recommended (not included).
steP 7
Briefly activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting section of this manual.
steP 8
Return base to the level position.
steP 9
Install mattress on base. Note: mattress is equipped with a microHook™
system to captivate the mattress (FIGURe 2).
FIGURE 2
Micro-Hook™
SYSTEM
IMPORTANT!
THIS PRODUCT SHOULD NOT BE USED WITH
EITHER A DUST RUFFLE OR A MATTRESS
ENCASEMENT. IF EITHER A DUST RUFFLE
OR MATTRESS ENCASEMENT IS NEEDED,
THEN A MATTRESS RETAINER BAR IS
REqUIRED.
Typical adjustable base installation is now complete.
InstaLLatIon
Micro-Hook™
DETAIL
100 I/C-UBL Adjustable Base Owners Manual 290-0029
9