Using The Smart Audio 400 Receiver - SMART Audio 400 User Manual

SMART AUDIO 400
To adjust the volume of the student microphone
1. On the teacher microphone, press the SELECT button until the OTHER LED is lit.
2. Use the UP or DOWN buttons to adjust the volume.
Using the SMART Audio 400 receiver
The receiver for the SMART Audio 400 classroom amplification system receives an audio signal
and transmits it to the speakers. Pairing the microphones and the receiver is easy, and the receiver
doesn't allow unpaired microphone audio to bleed into the speaker system. The LEDs make it
easy to tell at a glance if microphones are properly connected.
About the receiver
No. Function
1 MIC1
2 POWER
3 MIC2
4 LINK
5 Link button
6 Dip switches
9 smarttech.com/kb/171144
Description
LED indicates that a microphone is paired.
LED indicates the power status.
LED indicates that another microphone is paired.
LED indicates the pairing status.
Press the Link button to pair the receiver with the
microphones. See Pairing the microphones on page 12
for more information.
See Troubleshooting SMART Audio 400 on page 13 for
more information.