SMART Audio 400 User Manual page 6

Classroom amplification system
Hide thumbs Also See for Audio 400:
Table of Contents

Advertisement

SMART AUDIO 400
Using the teacher microphone
TIP
Wear the microphone 4–6" (10–15 cm) below your chin.
l
Charge the microphone every night.
l
Speak at a normal conversational volume.
l
Don't turn up the speaker volume too high. If you can hear your voice, it's too loud. Have
l
another adult in the room help you set the volume.
To turn the teacher microphone on
NOTE
The power on sequence occurs within 5 seconds
l
There isn't an audible beep when you turn on the microphone.
l
1. Press and hold the PWR/MUTE button for at least three seconds.
2. BATT LED briefly lights green.
3. BATT LED flashes orange while the microphone pairs.
4. The BATT LED lights solid green.
To turn the teacher microphone off
Press and hold the PWR/MUTE button for at least three seconds.
To mute the teacher microphone
Press the PWR/MUTE button.
If the microphone is muted for more than five minutes, the microphone turns off to conserve
battery.
To adjust the volume of the teacher microphone
1. Press the SELECT button until the OWN LED is lit.
2. Use the UP or DOWN buttons to adjust the volume.
6
smarttech.com/kb/171144

Advertisement

Table of Contents
loading

Table of Contents