Switching The Ventilation System On And Off - Bosch PXX875D34E Instruction Manual

Operating the appliance
en
Selecting a hotplate and heat setting
The hob must be switched on.
Touch the symbol for the required hotplate.
ã
1.
The . display gets brighter.
‹ ‹
Then select the required heat setting from the
2.
settings range.
The heat setting is set.
Changing the heat setting
Select the hotplate and then set the required heat
setting in the control panel.
Switching off the hotplate
Select the hotplate and set it to
range. The hotplate switches itself off and the residual
heat indicator appears.
Notes
If no pan has been placed on the hotplate, the
■
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
If a pan has been placed on the hotplate before
■
switching on the hob, it will be detected within
20 seconds of pressing the main switch and the
hotplate will be selected automatically. Once
detected, select the power level within the next
20 seconds or the hotplate will switch off.
If more than one pan is placed on the hob, only one
will be detected when switching it on.

Switching the ventilation system on and off

Always adjust the setting according to the current
Note:
conditions. To eliminate strong cooking smells, select a
high fan setting.
If no metal grease filter is available, the ventilation
Note:
system cannot be switched on. Insert the metal grease
filter. The hob functions are also available if there is no
metal grease filter.~ "Cleaning" on page 41
Do not obstruct the ventilation openings. Do not
Note:
place objects on the filter cover, as this will reduce the
power of the ventilation system.
16
. in the settings
‹ ‹
Switching on the ventilation system
If the and
Note: : w
the metal grease filter correctly.~ "Cleaning"
on page 41
The and symbols are available. The ventilation
: w
system can be switched on.
Touch the symbol.
:
1.
The ventilation system will start at fan setting
setting that is selected will be displayed in the
settings area.
Notes
– Heat settings cannot be changed while the
ventilation system setting is being applied.
– During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
settings area can then be used for the heat
settings again.
Select the required setting from the settings area.
2.
The setting that is selected will be displayed in the
settings area.
Selecting the fan setting
Touch the symbol.
:
1.
The ventilation system will start at fan setting
setting that is selected will be displayed in the
settings area.
Select the required setting from the settings area.
2.
The setting that is selected will be displayed in the
settings area.
Switching off the ventilation system
If you want to switch off the appliance, touch the
symbol. If you only want to switch off the ventilation
#
system, proceed as follows:
Touch the symbol.
:
1.
Select the symbol in the settings area.
‹
2.
Touch the symbol to switch to the setting area for
:
3.
the hob.
The run-on will start once the appliance has been
Note:
switched off (depending on the basic settings selected).
symbols are not available, insert
. The
ƒ
. The
ƒ