Bosch PXX875D34E Instruction Manual page 30

Cooking assist functions
en
Setting procedure
Attach the temperature sensor to the saucepan; see
1.
the section on ~ "Preparing and maintaining the
wireless temperature sensor"
Place a saucepan filled with sufficient liquid on the
2.
required hotplate and always put the lid on.
Select the hotplate on which you have placed the
3.
saucepan with the temperature sensor.
Touch the symbol on the temperature sensor.
å
4.
The indicator will light up in the control panel.
å
Select the right temperature setting from the table.
5.
The function has now been activated.
The temperature symbol
or oil has reached the right temperature for adding
the food. A signal will sound and the temperature
symbol will stop flashing.
Once the signal has sounded, take the lid off and
6.
add the food. Keep the lid on during cooking.
Do not cover the pan when using the "Frying
Note:
with a large amount of oil in the saucepan" function.
Switching off cooking functions
Select the hotplate and set it to
panel. The hotplate will switch off and the residual heat
indicator will appear.
To re-activate the cooking functions, wait for
Note:
approximately 10 seconds.
30
will flash until the water
å
. on the control
‹ ‹