Table of Contents
Advertisement
Selecting a hotplate and heat setting
The hob must be switched on.
Touch the
symbol for the required hotplate.
»
1.
¬
lights up on the display.
Then select the required heat setting from the
2.
settings range.
1.
The heat setting is set.
Changing the power level
Select the hotplate and set the desired power level in
the programming zone.
Switch off the hotplate
Select the hotplate and set it to
panel. The hotplate turns off and the residual heat
indicator appears.
Notes
If no pan has been placed on the hotplate, the
■
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
If a pan has been placed on the hotplate before
■
switching on the hob, it will be detected within
20 seconds of pressing the main switch and the
hotplate will be selected automatically. Once
detected, select the power level within the next
20 seconds or the hotplate will switch off.
If more than one pan is placed on the hob, only one
will be detected when switching it on.
The ventilation system must be switched off
■
separately. ~ "Switching off the ventilation system"
on page 13
Switching the ventilation system on and off
Always adjust the setting according to the current
Note:
conditions. To eliminate strong cooking smells, select a
high fan setting.
If no metal grease filter is available, the ventilation
Note:
system cannot be switched on. Insert the metal grease
filter. The hob functions are also available if there is no
metal grease filter.~ "Cleaning" on page 24
Do not obstruct the ventilation openings. Do not
Note:
place objects on the filter cover, as this will reduce the
power of the ventilation system.
Using tall items of cookware may prevent the
Note:
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
2.
in the programming
‹
Switching on the ventilation system
If the ventilation system cannot be switched on, make
sure that the metal grease filter is correctly inserted.
Touch the
symbol.
I
1.
The ventilation system will start at fan setting
fan setting that is selected will be displayed.
Notes
– Heat settings cannot be changed while the
setting is being applied for the ventilation system.
– During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
setting area can then be used for selecting the
heat settings again.
Select the required setting from the setting area.
2.
The setting that is selected will be displayed.
To set a different setting, touch the
3.
select the required setting from the setting area.
The setting that is selected will be displayed.
Switching off the ventilation system
If you want to switch off the appliance, touch the
symbol. If you only want to switch off the ventilation
#
system, proceed as follows:
Touch the
I
symbol.
1.
Select the
symbol in the settings area.
‹
2.
Touch the
symbol to switch to the setting area for
I
3.
the hob.
The run-on will start once the appliance has been
Note:
switched off (depending on the basic settings selected).
Operating the appliance
symbol and
I
en
. The
ƒ
13
Advertisement
Table of Contents
