Before Using For The First Time; Initial Use - Bosch PXX875D34E Instruction Manual

Before using for the first time

en
KBefore using for the first
time
Please read the following information before using the
t h e f i r s t t i m e B e f o r e u s i n g f o r
appliance for the first time:
Clean the appliance and all accessory parts thoroughly.
Before you can use your new appliance, you must apply
certain settings.

Initial use

When it is delivered, the appliance is preset to air
Note:
recirculation mode.
Possible settings:
In air recirculation mode, if
■
value ‹ (factory setting) is set.
In air extraction mode, if
■
is set.
‚
Switching over the display for exhaust air mode
For air extraction mode, the electronic controller's
display must be switched accordingly to the basic
settings.
Check whether the appliance is connected and
1.
switched off.
Switch on the appliance.
2.
Within ten seconds, touch and hold the
3.
approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the symbol again takes you to the basic
t
4.
settings.
and light up as a preset in the displays.
™‚ ‹
Touch the symbol repeatedly until the
t
5.
displayed.
14
is displayed, the
'‚ˆ
is displayed, the value
'‚ˆ
symbol for
t
Display screen
‹‚
"š
Š† .
‹ . †
is
™‚ˆ
Select the setting
‚
6.
Touch the symbol for at least four seconds.
t
7.
The settings are saved.
Use the main switch in order to exit the basic
8.
settings.
The display of the electronic controller is switched to air
extraction mode.
Switching over the display for circulating-air mode
When it is delivered, the appliance is set to air
recirculation mode.
If the settings have been changed, proceed as follows
to set the display for the electronic controller in the
basic settings for air recirculation mode.
Check whether the appliance is connected and
1.
switched off.
Switch on the appliance.
2.
Within ten seconds, touch and hold the
3.
approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the symbol again takes you to the basic
t
4.
settings.
and light up as a preset in the displays.
™‚ ‹
Touch the symbol repeatedly until the
t
5.
displayed.
Select the setting
‹
6.
in the control panel.
symbol for
t
Display screen
‹‚
"š
Š† .
‹ . †
™‚ˆ
in the control panel.
is