Fbwc Module - HP proliant ML110 gen9 Maintenance And Service Manual

Remove the GPU with the supporting holder from slot 1:
8.
Open the PCIe slot cover retainer.
a.
Loosen the captive screw of the supporting holder.
b.
Open the latch on the slot 1 and remove the GPU.
c.
Remove the supporting holder.
9.
To replace the component, reverse the removal procedure.

FBWC module

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: In systems that use external data storage, be sure that the server is the first unit
to be powered down and the last to be powered back up. Taking this precaution ensures that
the system does not erroneously mark the drives as failed when the server is powered up.
Removal and replacement procedures 41