Dimms; Memory-Processor Compatibility Information; Removing A Dimm - HP proliant ML110 gen9 Maintenance And Service Manual

Disconnect the battery cable from the system board connector and remove the Smart Storage
7.
Battery.
To replace the component, reverse the removal procedure.

DIMMs

Memory-processor compatibility information

•
Intel Xeon E5-2600 v3 processors supports:
Single-rank and dual-rank PC4-2133 (DDR4-2133) RDIMMs operating at up to 2133 MT/s
o
Dual-rank PC4-2133 (DDR4-2133) LRDIMMs operating at up to 2133 MT/s
o
•
Intel Xeon E5-2600 v4 processors supports:
Single-rank and dual-rank PC4-2400T (DDR4-2400) RDIMMs operating at up to 2400 MT/s
o
For the latest memory configuration information, see the product QuickSpecs on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/qs).

Removing a DIMM

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any system installation. Improper grounding can cause
electrostatic discharge.
To remove the component:
Power down the server (on page 24).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
3.
Removal and replacement procedures 44