Adaptive Knee Adjustment; Switches Setting After Finising Adjustment - Sony BVP-570 Maintenance Manual

2-1-3. Adaptive Knee Adjustment

Equipment : Color monitor
Object : White pattern
Preparations:
. Be sure to complete Section "2-1-2. V Substrate Volt-
age/V Reset Gate Adjustment".
. Set the menu follows.
MENU : Paint
PAGE : W.Clip/Knee (P6)
: Mode → adp
ITEM
Adjustment Procedures:
1. Open the lens iris and shoot the white pattern. If there
is unwanted color components on the screen, perform
the following adjustment.
2. Set the menu follows.
MENU : System config
PAGE : Others2 (S9)
: A.Knee LVL → 500%
ITEM
3. Make sure that there is no color on the color monitor.
If observing a color on the color monitor, decrease the
value of A.Knee LVL until no color is observed.
BVP-570/550/500
2-1. BVP-570 and Upgraded BVP-550/550P with BKP-5090

2-1-4. Switches Setting After Finising Adjustment

2-1-4. Switches Setting After Finising
Adjustment
After completing the adjustment, set switches S1-1 to S1-4
on the AT-126 board as follows.
S1-1 S1-2
ON OFF
2-1-3. Adaptive Knee Adjustment
S1-3 S1-4
OFF OFF
2-5 (E)