Sony BVP-570 Maintenance Manual page 563

2-9-5. 68P Connector
1. Remove the right side panel of the camera.
(Refer to Section 2-2.)
2. Pull out the five plug-in boards and the four shielding
plates.
3. Remove the DC/DC convertor unit.
(Refer to Section 2-13.)
4. Remove the upper rail.
5. Remove the four screws and remove the rail bracket.
B3 x 5
BVP-570
B2.6 x 5
B2.6 x 5
Rail
bracket
Upper rail
6. Remove the two screws and remove the CN-1120/
1121 board.
7. Disconnect the two flexible card wires each.
n
When disconnecting the flexible card wires, refer to
Section 2-7 "Disconnecting/Connecting of Flexible
Card Wires".
CN-1120
CN-1121
Flexible card wire
CN-1120
CN-1121
8. Install a new connector in the reverse order of
removal.
2-9. Replacing External Connectors
Flexible card wire
Flexible card wire
Flexible card wire
Precision
P2 x 5
Precision
P2 x 5
2-15 (E)