Notes On Installation - Sony BVP-570 Maintenance Manual

1-1. Notes on Installation

1-1-1. Note on OHB Installation
When installing the OHB with the serial number as shown
below in BVP-570 which was upgraded by BKP-5090, be
sure to perform adjustment item described in the supple-
ment separately available (Sony P/N: 9-968-544-01) in
order to obtain optimum CCD's dynamic range.
For details, please consult your local Sony Sales Office/
Service Center.
Model
OHB-550 (UC)
OHB-550P (CE)
OHB-550WS (UC)
OHB-550WS (UC)
OHB-550WSP (CE)
OHB-550WSP (CE)
OHB-450 (UC)
OHB-450P (CE)
OHB-451 (UC)
OHB-451P (CE)
OHB-455WS (UC)
OHB-455WSP (CE)
OHB-T450WS (UC)
OHB-T450WSP (CE)
1-1-2. Checking ROM Version
When this unit is used under the camera system using
MSU-700 and CNU-700, be sure to check that the ROM
version for IC10 on the CPU-171 board of the MSU-700 is
Ver.3.00 or higher and that the versions for IC4 and IC5 on
the AT-89 board of the CNU-700 are Ver.2.70 or higher.
If ROM replacement is required, please consult your local
Sony Sales Office/Service Center.
ROM Version
[MSU-700]
IC10/CPU-171 board
[CNU-700]
IC4, IC5/ AT-89 board
BVP-570
Installation
Serial No.
10001 - 10490
40001 - 40635
10001 - 10135
11001 - 11080
40001 - 40380
41001 - 41221
10001 - 10645
40001 - 40762
10001 - 10165
40001 - 40227
10001 - 10115
40001 - 40265
10001 - 10090
40001 - 40040
Ver.3.00 or higher
Ver.2.70 or higher
Section 1
1-2. Connector Input/Output Signals
TEST OUT
BNC 75 Z 1.0 V p-p
REMOTE (6P FEMALE)
No. SIGNAL
1 SERIAL DATA IN
2 SERIAL DATA OUT
3 UNREG (G)
4 VBS (X) OUT
5 VBS (G) OUT
6 UNREG OUT
MIC IN (3P FEMALE)
No. SIGNAL
1 MIC IN (G)
2 MIC IN (X)
3 MIC IN (Y)
(EXTERNAL VIEW)
SPECIFICATIONS
Serial data for camera control
VBS 1 V p-p, Zo = 75 Z
+10.5 V to +17 V
)
(EXTERNAL VIEW)
SPECIFICATIONS
_60 dBu High impedance
balanced
(0 dBu=0.775 Vrms)
1-1 (E)