NPort 6000 Series
Save Configuration
Go to Save Configuration and then click Save to save your submitted configuration changes to the NPort
6000's flash memory. The configuration changes will then be effective when the NPort 6000 is restarted. If you
do not save your changes before restarting, they will be discarded.
Restart
Restart System
Go to Restart System under Restart and then click Restart to restart the NPort 6000. Ensure that you save
all your configuration changes before you restart the system or else these changes will be lost.
Restart Ports
Go to Restart Ports under Restart and then select the ports to be restarted. Click Select All to select all the
ports. Click Submit to restart the selected ports.
12-3
Common Settings and Others