Overview The NPort 6450 secure serial device servers provide reliable serial-to-Ethernet connectivity for a wide range of serial devices. The NPort 6450 supports TCP Server, TCP Client, UDP, and Pair-Connection operation modes to ensure the compatibility of network software. In addition, the NPort 6450 also supports Secure TCP Server, Secure TCP Client, Secure Pair-Connection, and Secure Real COM modes for security critical applications such as banking, telecom, access control, and remote...
Hardware Introduction NOTE The LCD panel is only available with standard temperature models. Reset Button—Press the Reset button continuously for 5 sec to load factory defaults. Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off.
Name Color Function Orange Steady on: Ethernet port is idle. Blinking: Fiber port is transmitting or receiving data. Alarm The relay output (DOUT) is open (exception). The relay output (DOUT) is shorted (normal condition). Module Green A network module has been detected. No network module is present.
Software Installation Information The Document & Software CD contains the User’s Manual, NPort Search Utility, and the PComm Lite Suite. Insert the CD and follow the on-screen instructions. Please refer to the User’s Manual for additional details on using the NPort Search Utility and PComm Lite. Pin Assignments and Cable Wiring RS-232/422/485 Pin Assignments (male DB9) RS-422/...
OS Driver Windows Real COM Drivers: Windows Support 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Real TTY drivers: Linux 2.4, 2.6, and 3.x Fixed TTY drivers: SCO Unix, SCO OpenServer 5, OpenServer 6, UnixWare 7, UnixWare 2.1, SVR4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD 5, FreeBSD 6 Configuration...