Remington IPL6500 Use And Care Manual page 35

After Your Remington
When your Remington iLIGHT Ultra
Face & Body session is over, we sug-
gest the following:
• Be sure to record your treat-
ment using the iLIGHT App or the
TREATMENT CARDS. See TOC.
• Turn the device off by pressing the
POWER SWITCH.
• After each hair removal session, clean
the device, especially the TREATMENT
CAP and FLASH WINDOW (See
"Cleaning Remington iLIGHT Ultra
Face & Body Device" below.)
• After cleaning, store the device in
its original box and keep it away
from water.
CLEANING the Remington iLIGHT
Ultra Face & Body Device
Before and after each session, clean
your device, especially the FLASH
WINDOW, the SKIN CONTACT SENSORS,
and the SKIN TONE SENSOR window.
DO NOT place any part of the
Remington iLIGHT Ultra Face & Body
iLIGHT Ultra Face & Body Treatment
® ®
device in water or other liquids. If any
part of the device gets wet, DO NOT
USE. Contact Customer Service for
help. See Page 48. As with any electrical
device, a wet Remington iLIGHT Ultra Face
& Body device could cause electrocution
or electric shock.
• Make sure the device is turned off.
Remove the POWER CORD from the
device and wall socket before cleaning.
• Use a clean, lint-free cloth (one is pro-
vided with the unit) or a cotton swab to
gently wipe the Remington iLIGHT Ultra
Face & Body surface and especially
the TREATMENT CAP, FLASH WINDOW,
SKIN CONTACT SENSORS AND THE
SKIN TONE SENSOR window. If needed,
you can dampen the cloth or cotton
swab with water and mild soap. Allow
the device to dry completely before
using again.
• If you still need to remove dirt or debris,
you can use your fingernail or a firm piece
of plastic like a credit card. Be careful not
to damage the FLASH WINDOW.
35