Console - Tunturi T30 Owner's Manual

POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate.
The treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides
a path of least resistance for electrical current to
reduce the risk of electrical shock. This product
is equipped with a cord having an equipmentgrounded
conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not use extension cables when connecting the
equipment to the power source.
DANGER! Improper connection of the
equipmentgrounding
conductor can result in a risk of electric
shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
SAFETY TETHER KEY
The treadmill cannot be used if the tether key
is not properly installed on the console; if the
key is removed from its place, the treadmill will
immediately stop. Place the safety tether key in
its place on the console. Ensure that the clip of
the safety tether key is properly attached to your
clothing; as the cord tightens, make sure the clip
does not detach itself from your clothing before the
safety tether key disconnects from the console.

CONSOLE

KEY FUNCTIONS
Major Function Keys:
1. ELEVATION +: Increases the elevation level
in the range from 0% to 12% shown in the
HEART RATE / ELEVATION Display. Pressing
once increases 1 % and to speed up the
decrement by pressing and holding it for 2
seconds.
2. ELEVATION –: Decreases the elevation level
in the range from 0% to 12% shown in the
HEART RATE/ ELEVATON Display. Pressing
once increases 1 % and to speed up the
decrement by pressing and holding it for 2
seconds.
3. RESET: Press this button to turn on or turn off
the power.
4. START/STOP: Starts or stops the program.
5. SELECTION DIAL: The selection dial functions
in two ways:
a) Rotating the dial. By rotating the dial
clockwise, you can increase setting values
and scroll the programs in an order of the
programs. By rotating the dial anticlockwise,
you can decrease setting values and scroll the
programs in an order of the programs. During
preset profiles and [HRC] you can adjust the
intensity by rotating the dial.
b) Pressing the dial is [ENTER]. By pressing the
dial, you can accept the selection you made
when rotating the dial.
6. SPEED +: Increases the speed level in the
range from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)
shown in the SPEED Display. Pressing once
increases 0.1KPH (0.1 MPH) and to speed up
the increment by pressing and holding it for 2
seconds.
7. SPEED –: Decreases the speed level in the
range from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)
shown in the SPEED Display. Pressing once
decreases 0.1 KPH (0.1 MPH) and to speed up
the decrement by pressing and holding it for
2 seconds.
8. PSC: Position Speed Control (PSC) allows you
to adjust the track speed without touching
the console by changing your position on
the track during exercise. The PSC function
requires the use of a heart rate monitor. PSC
can be used with manual exercises, HRC
exercises with elevation adjustments and with
the [Rolling Hills] profile.
Sped Hot Keys:
6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14 KPH or
set as 2, 3,4,5,6,7 MPH. For example, the speed changes
from any speed to 8 KPH by pressing the Speed Hot Key 8.
Elevation Hot Keys:
6 Incline Hot Keys are set as 0,2,4,6,8 and 10% For
example, the elevation level changes from any level to 4%
by pressing the Elevation Hot Key 4.
LED INDICATORS & DISPLAYS AND
OPERATING RANGES
The default values are PROGRAM = Manual (M), TIME
= 00:00 (counting up), SPEED = 0,8 KMH / 0,5 MPH,
DISTANCE = 0.00 (counting up), KCAL = 0 (counting
up), HEART RATE = 0, and ELEVATION = 0.
A. 2 LED Indicators : The HEART RATE Indicator
is on and the HEART RATE /ELEVATION Display
shows heart rate. The ELEVATION Indicator is on
and the HEART RATE / ELEVATION Display shows
elevation level.
B. Program Display : Shows the information in
action and chosen by using the SELECTION
DIAL. P1 to P9 and 3 user-settings modes can be
chosen from.
4 4