Operating Instructions - Audiovox Prestige P-950 Owner's Manual

OPERATING INSTRUCTIONS

9
8
3, 4, 5, 6, 7
ON-OFF POWER BUTTON ( PWR )
Press this button to turn the unit on or off. If the ignition switch is
"on", the unit will also turn on automatically when a compact disc is
inserted, or if the MODE switch or BAND switch is pressed.
AUDIO CONTROL ( /
To increase the volume level, press the
increase and the level will be shown on the display panel from a
minimum of VOL 00 to a maximum of VOL 39. To decrease the
volume level, press the button. The display will automatically
return to the normal indication 5 seconds after the last volume
adjustment or when another function is activated. These control but-
tons are also used in conjunction with the Select (SEL) button
adjust the bass, treble, balance and fader levels as described in
, , and
.
16
33
32 2 17
OPEN
MUTE
Audio Audio
Control Control
LOUD
DISC RND DISC RND
RPT RPT
SCAN SCAN
MULTI-COLOR FLUORESCENT DISPLAY
EQ T/F AS/PS
1
SEL TOP
23
29 28 14 22
38
) BUTTONS
button. The volume will
19, 27, 30, 31
11, 20, 21, 36, 37
(BEHIND PANEL)
CAR COMPACT DISC PLAYER
TRACK TRACK
CH CH
EQ EQ ROCK ROCK
LOC LOC
Tune Tune
ST ST CLAS CLAS
POP POP
/Seek /Seek
LOUD LOUD
/Track /Track
Sub. W Sub. W
POWER LEVEL METER
2 3 4 5 6
SCN RPT RND D.DN D.UP MODE
24 25 26
39 40 35
15
PUSH SELECT CONTROL BUTTON (SEL)
This button is used to select the audio function (volume, bass,
treble, balance, or fade) whose setting is adjusted using the AUDIO
CONTROL buttons
unit for bass adjustment (BAS will appear on the display panel)
and an audible beep will occur. Pressing the button additional
times will select treble adjustment (TRE on the display), balance
(BAL), or fader (FAD), each accompanied by a beep tone. The
display will automatically return to the normal indication 5 seconds
after the last adjustment or when another function is activated.
NOTE: Base and Treble cannot be adjusted while Equalizer function
to is in ROCK, CLAS or POP mode.
BASS CONTROL
To adjust the bass level (Equalizer function inactive), first select
the Bass mode by pressing the SEL button
-3-
1
PWR
13
P-950 P-950
MONO
LOC
ILL
12
BAND
18
10
34
. Pressing the SEL button once will set the
so the BAS indication