Audiovox Prestige P-950 Owner's Manual page 7

advancing disc playing time will be shown on the display panel), or
the Review ( ) button to advance rapidly in the backward
direction (the decreasing disc playing time will be shown on the
display panel). During either function, the elapsed time within each
track will automatically be shown on the display panel.
TRACK ONE POSITION (TOP)
The Track One Position function is used to quickly return to the beginning
of the current CD in play (Track 1).
TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of
each track on the disc (SCAN) will appear on the display panel).
When a desired track is reached, press the SCAN button again to
cancel the function (SCAN will disappear from the display panel)
and play of the selected track will continue. Scan mode will also
be canceled by activating Repeat Play
REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the RPT
indication disappears from the display panel. Repeat Play mode
will also be canceled by activating the Track Scan
Play functions.
RANDOM PLAY SELECTOR (RND)
During disc play, press this button to play the tracks on the disc in a
random shuffled order (RND will appear on the display panel). In Random
Play mode, the TRACK Select function
random order instead of the normal progression. The Random Play mode
can be canceled by pressing the button again (RND indication will disappear
from the display panel) or by activating the Repeat Play
Scan functions.
These buttons are used to select the desired disc for play during changer
operation. To advance to a higher number disc, press the D.UP button, and
to return to a lower number disc, press the D.DN button. The num-
ber of the disc in play will be shown on the display panel.
Disc play is stopped and the disc is ejected when the front panel is
folded down and this button on the rear of the panel is pressed.
Radio or CD changer operation will automatically resume depending on
which mode was in operation prior to disc play. If the disc is not
removed from the unit within 15 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
accidentally damaged (
indicate that a disc is loaded in the player). Play of the disc can be
resumed by using the MODE button
, or Random Play .
During radio operation, press this button to call the time display on
the incorporated quartz clock. The current time will appear together
with an AM or PM indication. The display will return to the radio
frequency indication after 5 seconds.
During CD player operation, a second press of this button will call
or Random
the time display. During CD changer operation the first press of
the button will call the time display. In either case, the display will
return to the disc indication after 5 seconds.
The EQ button applies preset sound effects to the unit's audio output
will also select tracks in the
signal. The EQ button, when pressed, will activate one of three
operating modes (ROCK, CLAS, or POP). When the EQ function is
active, as displayed on the panel, the bass and treble levels cannot
or Track
be changed. When the EQ function is not active, the unit returns to
the user set bass and treble levels.
-7-
DISC SELECT UP/DOWN (D.UP/D.DN)
DISC EJECT ( )
will appear on the display panel to
TIME/FREQUENCY SELECTOR (T/F)
EQUALIZER BUTTON (EQ)
to choose CD player function.