Operating Instructions; Audible Beep Confirmation; Playing Source Selection; Volume Adjustment - Audiovox VME 9125 NAV Owner's Manual

OPERATING INSTRUCTIONS

Parking Brake Inhibit
When the green/white "Parking" wire is connected to the vehicle Parking Brake circuit, the front
TFT monitor will display video when the Parking Brake is engaged. (When the green/white wire is
grounded via the Parking Brake circuit, video will be displayed.)
Power On / Off
Press and hold the [ VOL/
front of the unit light up for a moment and the current mode status appears in the LCD.
Press and hold the [ VOL/

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through
the Setup menu.
Mute
Press [ VOL/ /
] knob to mute the volume from the unit. Press again to restore the volume.
[ ] is displayed on the LCD. Adjusting the volume or using any of the audio setup features
cancels the mute function.

Playing Source Selection

Press the [ MENU ] button on the front panel to change between
available playing sources. The playing mode is displayed on the
screen.
1. 1/2 or 2/2: Touch this page button to view the first or second
page of on-screen buttons.
2. Function icons
3. Clock
4. Touch for quick access to Equalizer level settings.

Volume Adjustment

To increase or decrease the volume level, turn the [ VOL/
knob on the front panel. The volume ranges from "0"to "50".
The LCD screen displays the volume level for 3 seconds.
EQ Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
/ ] button on the front panel to turn the unit on. The buttons on the
/
] button on the front panel to power off the unit.
35
Page 1 of the Menu
1 2
Page 2 of the Menu
/ ]
3 4 1