Operating Instructions - Audiovox PCD120U Owner's Manual

OPERATING INSTRUCTIONS

Power On/Off Button
1
Press the PWR button (1) to turn the unit on
and off when the vehicle ignition switch is on.
When the unit is off, the clock is automatically
displayed on the Liquid Crystal Display (LCD)
panel unless the ignition switch is off. If the
radio is off when the ignition switch is turned off,
the PWR button must be pressed to turn on the
radio after the ignition switch is turned on. If the
ignition switch is turned off while the radio is on,
the radio will come on automatically when the
ignition switch is again turned on.
Liquid Crystal Display Panel
2
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and all activated functions.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
Volume Control
3
To increase the volume level, press the VOL
button (3a). The volume will increase and the
level will be shown on the display panel from a
minimum of "VOL 00" to a maximum of "VOL
46". To decrease the volume, press the VOL
button (3b). The display will automatically return
to the normal indication 5 seconds after the last
volume adjustment or when another function is
activated. These buttons are also used in
conjunction with the SEL/MENU button (4) to
adjust the bass, treble, balance and fader
levels.
3a
1
PWR
4
SEL/MENU
MOD
3b
7
6
Select (SEL/MENU) Button
4
This SEL/MENU button (4) is used to select the
audio function (volume, bass, treble, balance or
fade) to be adjusted using the VOL buttons (3).
Press the SEL/MENU button once to set the
unit for volume adjustment ("VOL" and the
setting number will momentarily appear on the
display panel). Press the button additional
times to select bass ("BAS" on display panel),
treble (TRE), balance (BAL), fader (FAD), and
volume (VOL) again. The display returns to the
normal indication 5 seconds after the last
adjustment was made or when another function
is activated.
2
AM / FM / CD RECEIVER
TRACK MUTE
> > >>
SCN
8
PCD120U
9
/
PCD120U
6
RPT
LOU
5