Hotswap Mbp Controls - Lenovo RT8.0kVA Installation And User Manual

6u rack or tower ups rt8.0kva and rt11.0va

Hide thumbs Also See for RT8.0kVA:

Table of Contents

Figure 5. 8/11k VA 3Phase

Machine types and models

8/11k VA 1Phase MBP

8/11k VA 3Phase MBP

HotSwap MBP controls

The HotSwap MBP has a manual rotary switch with two positions:

• UPS: the load is supplied by the UPS, and the UPS is supplied by the normal AC power source.

• Bypass: the load is supplied directly by the bypass AC power source.

Two lights indicate the HotSwap MBP power status:

• UPS supply: Green light; when active, the UPS output is available, and the Bypass switch can safely be

turned to UPS position

• Bypass mode: Red light; when active, indicates that the HotSwap MBP is in Bypass mode (Bypass

switch turned to Bypass position)

Normal AC source switch and Bypass AC source switch: Use to switch off the AC source for the UPS

(for UPS maintenance and replacing)

MBP status detection: A signal cable, with RJ11 connector to plug to the UPS, allows the UPS to manage

the MBP status and display the following on the UPS display panel:

• MBP connection to UPS

• Bypass switch position

6U Rack or Tower UPS RT8.0kVA and RT11.0VA and Maintenance Bypass Installation and User's Guide

Weights

(lb/kg)

13.7 / 6.2

12.1 / 5.5

Dimensions (inch/mm)

D x W x H

8.7 x 13.2 x 5.1 / 220 x 336 x 130

5.2 x 13.2 x 5.1 / 132 x 336 x 130

Table of Contents

Rt11.0va