Connectors And Controls - Lenovo T1kVA Product Manual

Connectors and controls

The T1kVA and T1.5kVA Tower UPS units have a 5-button graphical LCD on the front. The LCD provides
useful information about the UPS, load status, events, measurements, and settings.
The following figure shows the control panel on the front of the Tower UPS.
Figure 4. Control panel on the front of the Tower UPS
The following functions are available on the control panel:
Status information: Displays the battery status, load percentage, output power, operational mode,
and load group information.
Measurements: Displays the output watts VA, amperage, power factor, voltage, frequency, input
voltage, input frequency, battery voltage, efficiency, and power usage.
Control: Displays the battery test, reset error state, configure load segments, clear power usage
measurements, and restore settings.
Settings: Allows you to change product general parameters and set input and output parameters,
on/off conditions, and battery configuration.
Fault log: Displays the event log and alarm history.
Identification: Displays the machine type, model, and serial number of the unit and the firmware
level of the UPS, including the optional NMC's firmware level, and IP address, if installed.
T1kVA and T1.5kVA Tower Uninterruptible Power Supplies 9