Extended Battery Modules (EBMs)
Up to four EBMs can be connected to the UPS.
Part number
55949BX
HotSwap MBP
The HotSwap MBP allows you to service or replace the UPS without interrupting the connected loads.
Standard installations for the HotSwap MBP
Rack installation
In a rack configuration, the MBP should always be mounted behind the extended battery module(s) -- not
behind the UPS.
Figure 4. 8/11k VA 1Phase
Submenu
Deep discharge protection
Available settings
[Yes] [No]
If set to Yes, the UPS
automatically prevents
battery pack from deep
discharge by adapting end
of back-up time voltage
threshold. Warranty void if
set to No.
Description
Additional Extended Battery Module
Default settings
[Yes]
.
Chapter 2
Presentation
13