Connectors And Controls - Lenovo RT1.5kVA Product Manual

2u rack or tower uninterruptible power supplies
Hide thumbs Also See for RT1.5kVA:
Table of Contents

Advertisement

Connectors and controls

The front of the 2U Rack or Tower UPS units feature a 5-button graphical LCD. The display provides useful
information about the UPS, load status, events, measurements, and settings.
The following figure shows the control panel on the front of the 2U Rack or Tower UPS.
Figure 4. Control panel on the front of the 2U Rack or Tower UPS
The following functions are available on the control panel:
Status information: Displays the battery status, load percentage, output power, operational mode,
and load group information.
Measurements: Displays the output Watts VA, amperage, power factor, voltage, frequency, input
voltage, input frequency, battery voltage, efficiency, and power usage.
Control: Displays the battery test, reset error state, configure load segments, clear power usage
measurements, and restore settings.
Settings: Allows you to change product general parameters and set input and output parameters,
on/off conditions, and battery configuration.
Fault log: Displays the event log and alarm history.
Identification: Displays the machine type, model, and serial number of the unit, and the firmware
level of the UPS, including the optional NMC's firmware level and IP address, if installed.
RT1.5kVA, RT2.2kVA and RT3kVA 2U Rack or Tower Uninterruptible Power Supplies
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt2.2kvaRt3kva

Table of Contents