Setting The Display; Activating/Deactivating Auto Answer; System Settings - Gigaset C330 Manual

Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / HS_settings.fm / 22.03.2013
Activating/deactivating advisory
tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key tone: every key press is confirmed
u
Confirmation tone (ascending tone
sequence): at the end of an entry/setting
and when a new entry arrives in the
answering machine list or call list
u
Battery low beep: the battery requires
charging.
In idle status:
¢
§§Menu§§
r
§OK§

Setting the display

Setting the screensaver
You can set a picture or the time to be dis-
played as a screensaver when the handset is
in idle status. This will replace the idle status
display. It may conceal the date, time and
name. The screensaver is not displayed in
certain situations, e.g. during a call or if the
handset is de-registered.
¢
§§Menu§§
q
§OK§
When the screensaver conceals the display,
briefly press any key to show the idle dis-
play.
¢
Audio Setting Key Tones
Select On to activate or Off to
deactivate the Key Tones. Con-
firmation tone und error tone is
not affected.
Press the display key to save the
settings.
¢
HS Setting Screen Saver
Select On to activate or Off to
deactivate the screen saver.
Press the display key to save
your setting.
Setting the contrast
You can set the level of the display bright-
ness.
¢ ¢
§§Menu§§
HS Setting
q
Select the desired level (3 levels)
§OK§
and press
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the charging cradle without having to
press the talk key c.
¢ ¢
§§Menu§§
HS Setting
q
Select On to activate or Off to
deactivate the auto answer
function for the handset and
§OK§
press .

System settings

System settings apply to the entire phone
system. They can be set on the base or on
any registered handset.
Deactivating the ringtone with
time control
You can deactivate the ringtone for the base
and all registered handsets with time con-
trol. The ringtone is deactivated between
the defined start and end time.
¢
§§Menu§§
System Setting
q
Select On/Off and press
q
Select On and press
q
Select Start&end and press
~
Enter the time for starting time
control (Silent from 00:00) and
§OK
press .
~
Enter the time for ending time
control (to 00:00) and press
Handset settings
Contrast
.
Auto Answer
¢
Time Control
§OK§
.
§OK§
.
§OK§
.
§OK
.
41