Sony RMT-D139P Service Manual page 11

A
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 24).
B
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (supplied). You will enjoy high quality images.
C
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using the component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high quality images. If your TV accepts progressive (480p)
format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 82).
Green
Blue
Red
Notes
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear image
on the TV screen.
SACD/DVD player
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it is
recommended that the user switch the connection to the standard definition output. If there are questions regarding
your Sony TV set's compatibility with this model 480p DVD player, please contact our customer service center.
22
Connecting to your TV
A
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection
•TVS DYNAMIC (page 60)
•TVS WIDE (page 60)
SACD/DVD player
A
(yellow)*
(white)
(red)
l : Signal flow
∗The yellow plug is used for video signals (page 20).
24
Yellow (Video)
White (L)
Red (R)
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly
TV
(yellow)
(white)
(red)
Audio/video cord
(supplied)
to audio input
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection Components to be connected
(page 24) TV (stereo)
A
(page 25) AV amplifier (receiver) having 5.1ch input jacks
B
• 4 speakers
(front L and R, rear L and R)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 25) AV amplifier (receiver) having a Dolby
B
input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 27) Stereo amplifier (receiver)
C
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
(page 27) MD deck/DAT deck
C
(page 29) AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
D
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
z
To enjoy SACD Multi or 96kHz/24bit sound, use the connection
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide
patents issues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.
Connecting to an AV amplifier (having 5.1ch input jacks or a digital input
B
jack) and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using B-2
realistic audio presence in the comfort of your own home.
: Connecting to the 5.1ch input jacks
B-1
You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or SACD multi
decoder of this player. You can also enjoy Dolby Surround (Pro Logic) sounds, or surround
sounds using various "SURROUND" modes (page 60).
xRecommended surround sound effects for this connection
When 6 speakers are connected. (Set "SURROUND" to "OFF.")
•Dolby Digital (5.1ch) (page 97)
•DTS (5.1ch) (page 97)
•SACD Multi channel (page 97)
: Connecting to a digital jack
B-2
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the surround sound effects of the player.
xRecommended surround sound effects using this connection with your
amplifier (receiver)
•Dolby Digital (5.1ch) (page 97)
•DTS (5.1ch) (page 97)
•96kHz/24bit PCM
z
B-2
When using connection , refer to the operating instructions of the receiver (amplifier) for correct speaker
setting location.
Notes
• After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 31)
and "DTS" to "DTS" (page 31). Otherwise, no sound or a loud noise will come from the speakers.
• When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set "48kHz/96kHz
PCM" to "96kHz/24bit" (page 89).
• SACD audio signals are not output from the digital jack.
1-5
through .
A D
* **
Digital or DTS decoder and a digital
B .
.
B-1
. With the following connections, you can enjoy a more
continued
23
continued
25