Connect Your Computer - Philips FTR9952/12 User Manual

MAINS INLET L
AUDIO IN AUDIO OUT
VGA OUT
AUDIO IN
VGA IN
R
5
1 2 2 4 3

Connect your computer

Connect one end of a VGA cable supplied to the video card of the computer
and the other end to the
the receiver box or at the
in case you have no receiver box connected to the monitor.
See the instructions with the monitor.
Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect audio cables to the audio outputs
of your Multimedia computer and to the
L Y CVBS AV1
(left) above the
L
Y/C CVBS
S-VHS
AV3 AV4
AUDIO AV2
or to the
R Cb Cr
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals
can be used together with a switchable adaptor. Macintosh computers with
Composite Sync and Sync on Green signals may need another special adaptor or
cable. Contact your dealer.
Connect the switchable adaptor for Apple video connectors to one end of a
VGA cable.
Put the DIP switches on the adaptor in the following positions :
1
off
Connect the end of the VGA cable with the adaptor to the video card of the
computer and the other end to the
back of the receiver box or at the
monitor in case you have no receiver box connected.
Screw the connectors down firmly.
15-pin D sub
(2-row)
To reproduce computer screen information and/or programmes, see p. 25.
* Apple Macintosh is a registered trademark of Apple Computer, Inc.
VGA MONITOR IN
connector
VGA IN
VGA MONITOR IN
and at the back of the monitor.
AUDIO IN L R
2 3 4
off on on
VGA MONITOR IN
VGA IN
15-pin mini D sub
Connect your computer
connector at the rear side of
at the back of the monitor
AUDIO MONITOR IN R
connector at the back of the receiver
connector on the
connector on the back of the
(3-row)
(right) and
23